DELL S50V User Manual
416
|
Interfaces
www.dell.com | support.dell.com
Interface Types
View Basic Interface Information
The user has several options for viewing interface status and configuration parameters. The
show
interfaces
command in EXEC mode will list all configurable interfaces on the chassis and has options to
display the interface status, IP and MAC addresses, and multiple counters for the amount and type of
traffic passing through the interface. If a port channel interface is configured, the
traffic passing through the interface. If a port channel interface is configured, the
show interfaces
command can list the interfaces configured in the port channel.
Interface Type
Modes
Possible
Possible
Default Mode
Requires
Creation
Creation
Default State
Physical
L2, L3
Unset
No
Shutdown (disabled)
Management
N/A
N/A
No
No Shutdown (enabled)
Loopback
L3
L3
Yes
No Shutdown (enabled)
Null
N/A
N/A
No
Enabled
Port Channel
L2, L3
L3
Yes
Shutdown (disabled)
VLAN
L2, L3
L2
Yes (except
default)
default)
L2 - No Shutdown (enabled)
L3 - Shutdown (disabled)
L3 - Shutdown (disabled)
Note: To end output from the system, such as the output from the
show interfaces
command, enter
CTRL+C and FTOS will return to the command prompt.
Note: Unicast counters in the
show interface
output will increment when the interface receives multicast or
broadcast packets.