DELL S50V User Manual

|

Interfaces

www.dell.com | support.dell.com

To use an interface-range macro in the 

command, enter this command: 

The example below shows how to change to the interface-range configuration mode using the 
interface-range macro named “test”.

Monitor interface statistics with the 

 command. This command displays an ongoing list of 

the interface status (up/down), number of packets, traffic statistics, etc. 

) displays in a continuous run, refreshing every 2 seconds by default. Use 

the following keys to manage the output.

 macro name

CONFIGURATION

Selects the interfaces range to be configured using the values 
saved in a named interface-range macro.

EXEC Privilege

View the interface’s statistics. Enter the type of interface and 
slot/port information:

•

For a 10/100/1000 Ethernet interface, enter the keyword 

 followed by the slot/port information.

•

For a Gigabit Ethernet interface, enter the keyword 

 followed by the slot/port information.

•

For the Management interface on the RPM, enter the 
keyword 

 followed by the slot/

port information.

•

For a SONET interface, enter the keyword 

 

followed by slot/port information. 

•

For a 10 Gigabit Ethernet interface, enter the keyword 

 followed by the slot/port 

information.

m - Change mode 

c - Clear screen

 l - Page up

a - Page down

T - Increase refresh interval (by 1 second)

 t - Decrease refresh interval (by 1 second)

q - Quit

FTOS(config)# interface range macro test

FTOS(config-if)#