DELL S50V User Manual
Interfaces | 447
•
Changes made do not affect any ongoing debounces. The timer changes take affect from the next
debounce onward.
debounce onward.
Assign a debounce time to an interface
Figure 20-28. Setting Debounce Time
Show debounce times in an interface
Figure 20-29. Showing Debounce Time
Disable ports when one only SFM is available (E300 only)
Selected ports can be shut down when a single SFM is available on the E300 system. Each port to be shut
down must be configured individually.
down must be configured individually.
Command Syntax
Command Mode
Purpose
link debounce time
[milliseconds] INTERFACE
Enter the time to delay link status change notification on this
interface.
interface.
Range: 100-5000 ms
•
Default for Copper is 3100 ms
•
Default for Fiber is 100 ms
show interface debounce
[
type
] [
slot/
port
]
EXEC Privilege
Show the debounce time for the specified interface.
Enter the interface type keyword followed by the type
of interface and slot/port information:
of interface and slot/port information:
•
For a 10/100/1000 Ethernet interface, enter the
keyword
keyword
GigabitEthernet
followed by the slot/
port information.
•
For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port
information.
•
For a 10 Gigabit Ethernet interface, enter the
keyword
keyword
TenGigabitEthernet
followed by the
slot/port information.
Note: FTOS rounds the entered debounce time up to the nearest hundredth.
Note in
Note in
FTOS(conf)#int gi 3/1
FTOS(conf-if-gi-3/1)#link debounce time 150
FTOS(conf-if-gi-3/1)#=
FTOS#
FTOS#show interfaces debounce gigabitethernet 3/1
Interface Time(ms)
GigabitEthernet 3/1 200
FTOS#