DELL 6024 User Manual
134
Configuring System Information
www
.dell.com | support.dell.com
3
Select a RADIUS server and check the Remove checkbox.
4
Click Apply Changes.
The RADIUS server is removed from the RADIUS Servers list.
The RADIUS server is removed from the RADIUS Servers list.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the CLI commands for working with fields in the OOB RADIUS
Settings page.
Settings page.
The following is an example of the CLI commands:
console(config)#interface out-of-band eth 1
console radius-server host oob/10.2.2.2 key 123
Table 6-13.
Out-of-Band RADIUS Settings CLI Commands
CLI Command
Description
radius-server host
ip-
address
[auth-port
auth-
port-number
] [timeout
timeout
] [retransmit
retries] [deadtime
deadtime
] [key
key-
string
] [source
source
]
[priority
priority
]
Specifies a RADIUS server host.
no radius-server host
ip-
address
Deletes a specified RADIUS server host.
radius-server source-ip
source
Specifies the source IP address that is used
for communication with RADIUS servers.
for communication with RADIUS servers.
no radius-server-ip
Returns to default.
radius-server timeout
timeout
Sets the interval for which a router waits for
a server host to reply.
a server host to reply.
no radius-server deadtime
Sets the dead time to 0.