DELL 6024 User Manual
Configuring System Information
157
Enabling ARP Proxy Using CLI Commands
The following table contains the CLI commands for enabling the ARP Proxy.
The following is an example of the CLI commands:
Console (config)# ip proxy-arp
Defining ARP Settings
Use the ARP Settings page to define ARP parameters for an IP interface. The ARP table is used to
maintain a correlation between each MAC address and its corresponding IP address. The ARP table
can be filled in statically by the user. When a static ARP entry is defined, a permanent entry is put
in the table, which the system uses to translate IP addresses to MAC addresses.
To open the ARP Settings page, click System
maintain a correlation between each MAC address and its corresponding IP address. The ARP table
can be filled in statically by the user. When a static ARP entry is defined, a permanent entry is put
in the table, which the system uses to translate IP addresses to MAC addresses.
To open the ARP Settings page, click System
→ IP Addressing→ ARP in the tree view.
Figure 6-35.
ARP Settings
Table 6-23.
ARP Proxy CLI Commands
CLI Command
Description
ip proxy-arp
Enables ARP proxy
no ip proxy-arp
Disables ARP proxy