DELL 6024 User Manual
460
Configuring Quality of Service
www
.dell.com | support.dell.com
3
Enter a name for the policy in the New Policy Name field.
4
Do one of the following:
•
•
To configure a class map for the class, click Class Map and select a class map from the
drop-down menu.
drop-down menu.
•
To configure a trust action a the class, click Action, click Trust, and select a trust method
from the drop-down menu.
from the drop-down menu.
•
To configure Set/Mark actions, click Set, select a method from the drop-down menu and
enter a value in the New Value field.
enter a value in the New Value field.
5
If you want to configure policing for the class, click Police, and select a policer type from the
drop-down menu.
•
drop-down menu.
•
For an aggregate policer, select an aggregate policer from the Aggregate Policer drop-
down menu.
down menu.
•
For a single policer, complete the information in the Committed Information Rate
(CIR), Committed Burst Size (CBS), and Exceed Action fields.
(CIR), Committed Burst Size (CBS), and Exceed Action fields.
6
Click Apply Changes.
The policy and its first class are created, and the device is updated.
The policy and its first class are created, and the device is updated.
Adding a Class
1
Open the QoS Policy page.
2
Select a policy from the drop-down menu.
3
Edit the information in the fields on the page, and click Apply Changes.
The class is added to the policy, and the device is updated.
The class is added to the policy, and the device is updated.
Deleting Policies:
1
Open the QoS Policy page.
2
Click Show All to display the Policy Table page.
3
Click Remove for each of the policies to be deleted, and then click Apply Changes.
The policies are deleted from the system, and the device is updated.
The policies are deleted from the system, and the device is updated.
Defining Policies Using the CLI Commands
Table 10-15.
Policy CLI Commands
CLI Command
Description
policy-map
policy-map-
name
Creates a policy map, and enters policy
map configuration mod.
map configuration mod.