DELL 6024 User Manual
462
Configuring Quality of Service
www
.dell.com | support.dell.com
Figure 10-18.
QoS Policy Binding Page
Interface — Selects an interface.
Attach Policy to Interface — The policy implemented on the interface.
Attach Policy to Interface — The policy implemented on the interface.
NOTE:
A policy map that contains a set or trust policy-map class configuration command, or that has an
ACL classification cannot be attached to an egress interface.
Attaching a Policy to an Interface
1
Open the QoS Policy Binding page.
2
Select an interface type.
Only one policy map per interface per direction is supported. However, the same policy map
can be applied to multiple interfaces and directions.
Only one policy map per interface per direction is supported. However, the same policy map
can be applied to multiple interfaces and directions.
3
Select the port, LAG, or VLAN number from the appropriate drop-down menu.
4
Select a policy from the Attach Policy to Interface drop-down menu.
5
Click Apply Changes.
The selected policy is implemented on the selected interface, and the device is updated.
The selected policy is implemented on the selected interface, and the device is updated.
Removing Policies from Interfaces
1
Open the QoS Policy Binding page.
2
Click Show All to display the PTI Reference Table page.