DELL 9.8(0.0) User Manual
Version
Description
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
Usage
Information
Information
Hello PDUs are “padded” only when both the global and interface padding options
are ON. Turning either one OFF disables padding for the corresponding interface.
are ON. Turning either one OFF disables padding for the corresponding interface.
Related
Commands
Commands
— turns ON or OFF padding for LAN and point-to-point hello PDUs.
isis ipv6 metric
Assign metric to an interface for use with IPv6 information.
Syntax
isis ipv6 metric default-metric [level-1 | level-2]
To return to the default values, use the no ipv6 isis metric [default-
metric] [level-1 | level-2] command.
To return to the default values, use the no ipv6 isis metric [default-
metric] [level-1 | level-2] command.
Parameters
default-metric
Metric assigned to the link and used to calculate the cost
from each other router via the links in the network to other
destinations. You can configure this metric for Level 1 or
Level 2 routing. The range is from 0 to 16777215. The default
is 10.
from each other router via the links in the network to other
destinations. You can configure this metric for Level 1 or
Level 2 routing. The range is from 0 to 16777215. The default
is 10.
level-1
(OPTIONAL) Enter the keywords level-1 to configure the
shortest path first (SPF) calculation for Level 1 (intra-area)
routing. This value is the default.
shortest path first (SPF) calculation for Level 1 (intra-area)
routing. This value is the default.
level-2
(OPTIONAL) Enter the keywords level-2 to configure the
SPF calculation for Level 2 (inter-area) routing.
SPF calculation for Level 2 (inter-area) routing.
Defaults
default-metric = 10; level-1 (if not otherwise specified)
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Intermediate System to Intermediate System (IS-IS)
1057