DELL 9.8(0.0) User Manual
Column Heading
Description
Type
Lists whether the MAC address was manually configured
(Static), learned (Dynamic), or associated with a specific port
(Sticky). An (N) indicates that the specified MAC address has
been learnt by a neighbor and is synced to the node.
(Static), learned (Dynamic), or associated with a specific port
(Sticky). An (N) indicates that the specified MAC address has
been learnt by a neighbor and is synced to the node.
Interface
Displays the interface type and slot/port information. The
following abbreviations describe the interface types:
following abbreviations describe the interface types:
• gi — Gigabit Ethernet followed by a slot/port
• po — Port Channel followed by a number. Range for
• po — Port Channel followed by a number. Range for
Terascale is from 1 to 255. \
• te — 10–Gigabit Ethernet followed by a slot/port.
State
Lists if the MAC address is in use (Active) or not in use
(Inactive).
(Inactive).
The following describes the show mac-address-table count command shown
in the following example.
in the following example.
Line Beginning
With
With
Description
MAC Entries...
Displays the number of MAC entries learned per VLAN.
Dynamic
Address...
Address...
Lists the number of dynamically learned MAC addresses.
Static Address...
Lists the number of user-defined MAC addresses.
Total MAC...
Lists the total number of MAC addresses the switch uses.
Example
(Count)
(Count)
Dell# show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 110
Static Address (User-defined) Count : 0
Sticky Address Count : 0
Total Synced Mac from Peer(N): 100
Total MAC Addresses in Use: 110
Dell#
Related
Commands
Commands
show mac-address-table aging-time
Display the aging times assigned to the MAC addresses on the switch.
S4820T
Syntax
show mac-address-table aging-time [vlan vlan-id]
1120
Layer 2