DELL 9.8(0.0) User Manual
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Added support for VRF. Introduced on the S6000-ON.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.1
Introduced on the S4810.
show ipv6 neighbors
Display IPv6 discovery information. Entering the command without options shows all IPv6 neighbor
addresses stored on the control processor (CP).
S4820T
Syntax
show ipv6 neighbors [vrf vrf-name] [ipv6-address| interface
interface]
interface]
Parameters
vrf vrf-name
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to display the neighbors corresponding to that VRF.
the VRF to display the neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are displayed.
corresponding to the default VRF are displayed.
ipv6-address
Enter the IPv6 address of the neighbor in the x:x:x:x::x
format.
format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
fields of zero.
interface
interface
interface
Enter the keyword interface then the interface type and
slot/port or number information:
slot/port or number information:
• For a port channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults
none
Neighbor Discovery Protocol (NDP)
1225