DELL 9.8(0.0) User Manual
• For OSPF, you can set the resolution in the range 1 to 1592, where the default is
1.
• The resolution value used to map static routes is not configurable. By default,
Dell Networking OS assigns a metric of 0 to static routes.
• The resolution value used to map RIP routes is not configurable. The RIP hop-
count is automatically multiplied by 16 to scale it. For example, a RIP metric of
16 (unreachable) scales to 256, which considers the route to be DOWN.
Related
Commands
Commands
•
– configures the metric threshold used to determine the UP
and/or DOWN state of a tracked route.
•
an IPv4 route metric.
IPv6 Object Tracking Commands
The following section describes the IPv6 object tracking commands.
The following object tracking commands apply to IPv4 and IPv6:
The following object tracking commands apply to IPv4 and IPv6:
•
•
•
•
•
•
show track ipv6 route
Display information about all tracked IPv6 routes, including configuration, current tracked state (UP or
DOWN), and the clients which are tracking an object.
Syntax
show track ipv6 route [brief]
Parameters
brief
(OPTIONAL) Display a single line summary of information for
tracked IPv6 routes.
tracked IPv6 routes.
Command
Modes
Modes
• EXEC
• EXEC Privilege
• EXEC Privilege
Command
History
History
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
8.3.12.0
Introduced on the S4810.
Object Tracking
1253