DELL 9.8(0.0) User Manual

Command
Modes

CONFIGURATION

Command
History

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

8.3.12.0

Introduced on the S4810.

8.4.1.0

Introduced.

Usage
Information

Use this command to create an object that tracks the routing state of an IPv6 Layer
3 interface:

• The status of the IPv6 interface is UP only if the Layer 2 status of the interface is

UP and the interface has a valid IP address.

• The Layer 3 status of an IPv6 interface goes DOWN when its Layer 2 status goes

down (for a Layer 3 VLAN, all VLAN ports must be down) or the IP address is

removed from the routing table.

Related
Commands

•

show track ipv6 route

– displays information about tracked IPv6 routes,

including configuration, current state, and clients which track the route.

•

track interface ip routing

– configures object tracking on the routing status of

an IPv4 Layer 3 interface.

track ipv6 route metric threshold

Configure object tracking on the threshold of an IPv4 route metric.

Syntax

track object-id ipv6 route ipv6-address/prefix-len metric
threshold
To return to the default setting, use the no track object-id command.

Parameters

object-id

Enter the ID number of the tracked object. The range is 1 to
500.

ipv6-address/
prefix-len

Enter an IPv6 address in X:X:X:X::X format. The valid IPv6
prefix lengths are from /0 to / 128.

Defaults

none