DELL 9.8(0.0) User Manual
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Added support for the Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre- 6.1.1.1
Introduced on the E-Series.
distribute-list out
To restrict certain routes destined for the local routing table after the SPF calculation, apply a filter.
S4820T
Syntax
distribute-list prefix-list-name out [bgp | connected | isis |
rip | static]
To remove a filter, use the no distribute-list prefix-list-name out
[bgp | connected | isis | rip | static] command.
rip | static]
To remove a filter, use the no distribute-list prefix-list-name out
[bgp | connected | isis | rip | static] command.
Parameters
prefix-list-
name
name
Enter the name of a configured prefix list.
bgp
(OPTIONAL) Enter the keyword bgp to specify that BGP
routes are distributed.
routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
connected
(OPTIONAL) Enter the keyword connected to specify that
connected routes are distributed.
connected routes are distributed.
isis
(OPTIONAL) Enter the keyword isis to specify that IS-IS
routes are distributed.
routes are distributed.
1276
Open Shortest Path First (OSPFv2 and OSPFv3)