DELL 9.8(0.0) User Manual
ip ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
S4820T
Syntax
ip ospf hello-interval seconds
To return to the default value, use the no ip ospf hello-interval command.
To return to the default value, use the no ip ospf hello-interval command.
Parameters
seconds
Enter the number of seconds for the interval. The range is
from 1 to 65535. The default is 10 seconds.
from 1 to 65535. The default is 10 seconds.
Defaults
10 seconds
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre- 6.1.1.1
Introduced on the E-Series.
Usage
Information
Information
The time interval between the hello packets must be the same for routers in a
network.
network.
Related
Commands
Commands
Open Shortest Path First (OSPFv2 and OSPFv3)
1287