DELL 9.8(0.0) User Manual
ip ospf cost
Change the cost associated with the OSPF traffic on an interface.
S4820T
Syntax
ip ospf cost cost
To return to default value, use the no ip ospf cost command.
To return to default value, use the no ip ospf cost command.
Parameters
cost
Enter a number as the cost. The range is from 1 to 65535.
Defaults
The default cost is based on the reference bandwidth.
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre- 6.1.1.1
Introduced on the E-Series.
Usage
Information
Information
If this command is not configured, cost is based on the auto-cost command.
When you configure OSPF over multiple vendors, to ensure that all routers use the
same cost, use the ip ospf cost command. Otherwise, OSPF routes improperly.
same cost, use the ip ospf cost command. Otherwise, OSPF routes improperly.
Related
Commands
Commands
Open Shortest Path First (OSPFv2 and OSPFv3)
1285