DELL 9.8(0.0) User Manual
into the PBR CAM region. When incoming traffic hits an entry in the CAM, the
traffic is redirected to the corresponding next-hop IP address specified in the rule.
traffic is redirected to the corresponding next-hop IP address specified in the rule.
NOTE: Apply the redirect list to physical, VLAN, or LAG interfaces only.
Related
Commands
Commands
•
– displays the content of the PBR CAM.
•
– displays the redirect-list configuration.
ip redirect-list
Configure a redirect list and enter REDIRECT-LIST mode.
S4820T
Syntax
ip redirect-list redirect-list-name
To remove a redirect list, use the no ip redirect-list command.
To remove a redirect list, use the no ip redirect-list command.
Parameters
redirect-list-
name
name
Enter the name of a redirect list.
Defaults
None
Command
Modes
Modes
CONFIGURATION
Command
History
History
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.4(0.0)
Introduced on the S4810, S4820T, S6000, and Z9000.
8.4.2.1
Introduced on the C-Series and S-Series.
8.4.2.0
Introduced on the E-Series Tera Scale.
7.7.1.0
Introduced on the E-Series ExaScale.
1382
Policy-based Routing (PBR)