DELL 9.8(0.0) User Manual
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the C-Series and S-Series.
Usage
Information
Information
The VLAN:
• can be in only one mode, either community, isolated, or primary.
• mode ode to community or isolated even before associating it to a primary
• mode ode to community or isolated even before associating it to a primary
VLAN. This secondary VLAN continues to work normally as a normal VLAN even
though it is not associated to a primary VLAN. (A syslog message indicates this.)
• must not have a port in it when VLAN mode is being set.
Only ports (and port channels) configured as promiscuous, host, or PVLAN trunk
ports (as previously described) can be added to the PVLAN. No other regular ports
can be added to the PVLAN.
ports (as previously described) can be added to the PVLAN. No other regular ports
can be added to the PVLAN.
After using this command to configure a VLAN as a primary VLAN, use the
private-vlan mapping secondary-vlan command to map secondary VLANs
to this VLAN.
private-vlan mapping secondary-vlan command to map secondary VLANs
to this VLAN.
Related
Commands
Commands
— maps secondary VLANs to the selected
primary VLAN.
— sets PVLAN mode of the selected port.
private-vlan mapping secondary-vlan
Map secondary VLANs to the selected primary VLAN.
S4820T
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
Private VLAN (PVLAN)
1437