DELL 9.8(0.0) User Manual
Usage
Information
Information
After you enable PVST+, the device runs an STP instance for each VLAN it supports.
Related
Commands
Commands
show spanning-tree pvst
View the Per-VLAN spanning tree configuration.
S4820T
Syntax
show spanning-tree pvst [vlan vlan-id] [brief] [guard]
Parameters
vlan vlan-id
(OPTIONAL) Enter the keyword vlan then the VLAN ID. The
range is 1 to 4094.
range is 1 to 4094.
brief
(OPTIONAL) Enter the keyword brief to view a synopsis of
the PVST+ configuration information.
the PVST+ configuration information.
interface
(OPTIONAL) Enter one of the interface keywords along with
the slot/port information:
the slot/port information:
• For a Port Channel interface, enter the keyword port-
channel then a number: The range is 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
guard
(OPTIONAL) Enter the keyword guard to display the type of
guard enabled on a PVST interface and the current port state.
guard enabled on a PVST interface and the current port state.
Defaults
none
Command
Modes
Modes
• EXEC
• EXEC Privilege
• EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Per-VLAN Spanning Tree Plus (PVST+)
1445