DELL 9.8(0.0) User Manual

as a sub-option, and each of those sub-options can accept any of the three sub-
options as a sub-option, and so forth. The second Example shows the creation of a 
standard IPv4 ACL called snmp-ro-acl and then assigning it to the SNMP 
community guest.

NOTE: For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP; TCP and 
ICMP rules are not valid for SNMP. In IPv6 ACLs, port rules are not valid for 
SNMP.

Example

Dell#config

Dell(conf)# snmp-server community public ro

Dell(conf)# snmp-server community guest ro security-name 

guestuser

Dell(conf)#

Example

Dell(conf)# ip access-list standard snmp-ro-acl

Dell(config-std-nacl)#seq 5 permit host 10.10.10.224

Dell(config-std-nacl)#seq 10 deny any count

!

Dell(conf)#snmp-server community guest ro snmp-ro-acl

Dell(conf)#

Related 
Commands

 — names (or selects) a standard access list to filter based on 

IP address.

 — configures an access list based on IPv6 addresses or protocols.

 — displays the current SNMP configuration and defaults.

snmp-server contact

Configure contact information for troubleshooting this SNMP node.

Syntax

snmp-server contact text
To delete the SNMP server contact information, use the no snmp-server 
contact command.

Parameters

Enter an alphanumeric text string, up to 55 characters long.

Defaults

none

Command 
Modes

CONFIGURATION

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Simple Network Management Protocol (SNMP) and Syslog

1699