DELL 9.8(0.0) User Manual

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

E-Series legacy 
command

snmp-server enable traps

Enable SNMP traps.

Syntax

snmp-server enable traps [notification-type] [notification-
option]
To disable traps, use the no snmp-server enable traps [notification-
type] [notification-option] command.

Parameters

Enter the type of notification from the following list:

• bgp — Notification of changes in the BGP process.
• config — Notification of changes to the startup or 

running configuration.

• ecfm — Notification of changes to ECFM.
• ecmp — Enable an ECMP trap to notify of ECMP or link 

bundle traffic imbalances.

• envmon — For Dell Networking device notifications when 

an environmental threshold is exceeded.

• isis — Notification of intermediate service traps.
• lacp — Notification of changes.
• snmp — Notification of RFC 1157 traps.
• stp — Notification of a state change in the spanning tree 

protocol (RFC 1493).

• vlt — Notification of virtual link trunking.
• vrrp — Notification of a state change in a VRRP group.
• xstp — Notification of a state change in MSTP (802.1s), 

RSTP (802.1w), and PVST+.

For the envmon notification-type, enter one of the following 
optional parameters:

1700

Simple Network Management Protocol (SNMP) and Syslog