DELL 9.8(0.0) User Manual
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.3.1.0
Introduced on the C-Series and S-Series.
Usage
Information
Information
You must first enable DEI for this configuration to take effect.
dei mark
Set the DEI value on egress according to the color currently assigned to the packet.
S4820T
Syntax
dei mark {green | yellow} {0 | 1}
Parameters
0 | 1
Enter the bit value you want to map to a color.
green | red |
yellow
yellow
Choose a color:
• Green: High priority packets that are the least preferred
to be dropped.
• Yellow: Lower priority packets that are treated as best-
effort.
Defaults
All the packets on egress are marked with DEI 0.
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1832
VLAN Stacking