DELL 9.8(0.0) User Manual
Version
Description
9.0.2.0
Introduced on the S6000.
8.3.11.1
Introduced on the Z9000.
8.2.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the C-Series and S-Series.
Usage
Information
Information
You must enable the stackable VLAN (using the vlan-stack compatible
command) on the VLAN prior to adding a member to the VLAN.
command) on the VLAN prior to adding a member to the VLAN.
Related
Commands
Commands
— enables stackable VLAN on a VLAN.
stack-unit stack-group
Configure a stacking group specified by an ID.
Syntax
[no] stack-unit unit-id stack-group stack-group-id
Parameters
unit-id
Enter the stack unit ID.
stack-group-id
Enter the stack group ID. The range is from 0 to 16.
[no]
Use no stack-unit unit-id stack-group stack-id
to remove the current stack group configuration.
to remove the current stack group configuration.
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.10.2
Introduced on the S4810.
1834
VLAN Stacking