DELL 9.8(0.0) User Manual

Command
Modes

VLT DOMAIN (conf-vlt-domain)

Command
History

This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.5(0.1)

Introduced on the Z9500.

9.2(0.0)

Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.

9.2(0.2)

Introduced on the Z9000, S4810, and S4820T.

9.0.2.0

Introduced on the S6000.

peer-link port-channel

Configure the specified port channel as the chassis interconnect trunk between VLT peers in the domain.

Syntax

peer-link port-channel port-channel-number {peer-down-vlan vlan
id}

Parameters

port-channel-
number

Enter the port-channel number that acts as the interconnect
trunk. The range is from 1 to 128.

peer-down-
vlan vlan id

Enter the keyword peer-down-vlan then a VLAN ID to
configure the VLAN that the VLT peer link uses when the VLT
peer is down.

Defaults

Not configured.