DELL 9.8(0.0) User Manual
Version
Description
8.3.1.0
Add the DSCP value for ACL matching.
8.2.1.0
Allows ACL control of fragmented packets for IP (Layer 3)
ACLs.
ACLs.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
7.4.1.0
Added support for the non-contiguous mask and added the
monitor option.
monitor option.
6.5.10
Expanded to include the optional QoS order priority for the
ACL entry.
ACL entry.
Usage
Information
Information
The order option is relevant in the context of the Policy QoS feature only. For
more information, refer to the “Quality of Service” chapter of the Dell Networking
OS Configuration Guide.
more information, refer to the “Quality of Service” chapter of the Dell Networking
OS Configuration Guide.
The software cannot count both packets and bytes; when you enter the count byte
options, only bytes are incremented.
options, only bytes are incremented.
Related
Commands
Commands
— assigns a permit filter for UDP packets.
permit tcp
To pass TCP packets meeting the filter criteria, configure a filter.
Syntax
permit tcp {source mask | any | host ip-address} [bit]
[operator port [port]] {destination mask | any | host ip-
address} [bit] [dscp] [operator port [port]] [count [byte]
[order] [fragments] [no-drop]
To remove this filter, you have two choices:
[operator port [port]] {destination mask | any | host ip-
address} [bit] [dscp] [operator port [port]] [count [byte]
[order] [fragments] [no-drop]
To remove this filter, you have two choices:
• Use the no seq sequence-number command if you know the filter’s
sequence number.
• Use the no permit tcp {source mask | any | host ip-address}
{destination mask | any | host ip-address} command.
Parameters
source
Enter the IP address of the network or host from which the
packets were sent.
packets were sent.
252
Access Control Lists (ACL)