DELL 9.8(0.0) User Manual
Version
Description
8.1.1.0
Introduced on the E-Series ExaScale.
7.8.1.0
Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Prior to 7.8.1.0, names are up to 16 characters long.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre-6.1.1.0
Introduced on the E-Series.
Related
Commands
Commands
— redistributes routes that match routes advertised by other
routers.
— redistributes routes that match a route type.
— redistributes routes that match a specific tag.
match ip next-hop
To match based on the next-hop IP addresses specified in an IP access list or IP prefix list, configure a
filter.
Syntax
match ip next-hop {prefix-list prefix-list-name}
To delete a match, use the no match ip next-hop {prefix-list prefix-
list-name} command.
To delete a match, use the no match ip next-hop {prefix-list prefix-
list-name} command.
Parameters
prefix-list
prefix-list-
name
prefix-list-
name
Enter the keywords prefix-list and then enter the name
of configured prefix list, up 10 140 characters.
of configured prefix list, up 10 140 characters.
Defaults
Not configured.
Command
Modes
Modes
ROUTE-MAP
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Access Control Lists (ACL)
297