DELL 9.8(0.0) User Manual
If you do not configure the default-metric command, in addition to the
redistribute command, or there is no route map to set the metric, the metric
for redistributed static and connected is “0”.
redistribute command, or there is no route map to set the metric, the metric
for redistributed static and connected is “0”.
To redistribute the default route (0.0.0.0/0), configure the neighbor default-
originate command.
originate command.
As BGP does not query next-hop information corresponding to locally originated
routes, a local route with an unreachable next-hop is chosen as the best route.
routes, a local route with an unreachable next-hop is chosen as the best route.
When a combination of locally originated and peer originated routes occurs, both
these routes will exist in the RTM. However, only the best route is kept active in the
RTM and the remaining route is rendered in-active.
these routes will exist in the RTM. However, only the best route is kept active in the
RTM and the remaining route is rendered in-active.
It is possible to keep only one locally originated route in the BGP database.
Network command has preference over the re-distributed routes. When the locally
originated route is no longer present in the database the other route is
automatically installed.
Network command has preference over the re-distributed routes. When the locally
originated route is no longer present in the database the other route is
automatically installed.
Related
Commands
Commands
— injects the default route.
redistribute ospf
Redistribute OSPF routes into BGP.
S4820T
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match
internal]] [route-map map-name]
To stop redistribution of OSPF routes, use the no redistribute ospf
process-id command.
internal]] [route-map map-name]
To stop redistribution of OSPF routes, use the no redistribute ospf
process-id command.
Parameters
process-id
Enter the number of the OSPF process. The range is from 1
to 65535.
to 65535.
match external
{1 | 2}
{1 | 2}
(OPTIONAL) Enter the keywords match external to
redistribute OSPF external routes. You can specify 1 or 2 to
redistribute those routes only.
redistribute OSPF external routes. You can specify 1 or 2 to
redistribute those routes only.
match internal
(OPTIONAL) Enter the keywords match internal to
redistribute OSPF internal routes only.
redistribute OSPF internal routes only.
route-map
map-name
map-name
(OPTIONAL) Enter the keywords route-map then the name
of a configured route map.
of a configured route map.
Defaults
Not configured.
Command
Modes
Modes
ROUTER BGP
Border Gateway Protocol
479