DELL 9.8(0.0) User Manual

the interface range command. You cannot create virtual interfaces (VLAN,
Port-channel) using the interface range command.

NOTE: If a range has VLAN, physical and port-channel interfaces, only
commands related to physical interfaces can be bulk configured. To configure
commands specific to VLAN and port-channel only those respective interfaces
should be configured in a particular range.

Example (Single
Range)

This example shows a single range bulk configuration.

Dell(config)# interface range tengigabitethernet 5/3 - 23

Dell(config-if-range-te-5/3-23)# no shutdown

Dell(config-if-range-te-5/3-23#

Example
(Multiple
Range)

This example shows how to use commas to add different interface types to the
range enabling all Tengigabit Ethernet interfaces in the range 5/1 to 5/23 and both
Tengigabit Ethernet interfaces 1/1 and 1/2.

Dell(config-if)# interface range tengigabitethernet 5/1 -

5/23, tengigabitethernet 1/1 - 1/2

Dell(config-if-range-te-1/1-2,te-5/1-23)# no shutdown

Dell(config-if-range-te-1/1-2,te-5/1-23)#

Example
(Multiple
Range)

This example shows how to use commas to add VLAN and port-channel interfaces
to the range.

Dell(config-if)# interface range tengigabitethernet 5/1 - 23,

tengigabitethernet 1/1 – 2,

Vlan 2–100, Port 1–25

Dell(config-if-range-te-1/1-2,te-5/1-23,vl-2-100,po-1-25)# no

shutdown

Dell(config-if-range-te-5/1-24,te-1/1-2,vl-2-100,po-1-25)#