DELL 9.8(0.0) User Manual

Version

Description

8.1.1.0

Introduced on the E-Series ExaScale.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

6.1.1.0

Introduced on the E-Series.

Example

Dell(conf)#interface range tengigabitethernet 1/1 - 2

Dell(conf-if-range-gi-1/1-2)#show config

!

interface TenGigabitEthernet 1/1

  no ip address

  switchport

  no shutdown

!

interface TenGigabitEthernet 1/2

  no ip address

  switchport

  no shutdown

Dell(conf-if-range-gi-1/1-2)#

show interfaces

Display information on a specific physical interface or virtual interface.

S4820T

Syntax

show interfaces interface

Parameters

Enter one of the following keywords and slot/port or number 
information:

• For a Loopback interface, enter the keyword loopback 

then a number from 0 to 16383.

• For stack-units, enter the keywords stack-unit then 

the slot/port information.

• For a Null interface, enter the keyword null then the 

Null interface number.

• For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE then the slot/port information.

• For a VLAN interface, enter the keyword vlan then a 

number from 1 to 4094.

• For a tunnel interface, enter the keyword tunnel then 

the tunnel ID. The range is from 1 to 16383.

824

Interfaces