DELL 9.8(0.0) User Manual
Line
Description
TenGigabitEthern
et 1/1...
et 1/1...
Interface type, slot/port, and administrative and line
protocol status.
protocol status.
Hardware is...
Interface hardware information, assigned MAC address, and
current address.
current address.
Pluggable media
present...
present...
Present pluggable media wavelength, type, and rate. The
error scenarios are:
error scenarios are:
• Wavelength, Non-qualified — Dell Force10 ID is not
present, but wavelength information is available from
XFP or SFP serial data
• Wavelength, F10 unknown — Dell Force10 ID is present,
but not able to determine the optics type
• Unknown, Non-qualified — if wavelength is reading
error, and F10 ID is not present
Dell Networking allows unsupported SFP and XFP
transceivers to be used, but Dell Networking OS might not
be able to retrieve some data about them. In that case,
typically when the output of this field is “Pluggable media
present, Media type is unknown”, the Medium and the
XFP/SFP receive power reading data might not be present in
the output.
transceivers to be used, but Dell Networking OS might not
be able to retrieve some data about them. In that case,
typically when the output of this field is “Pluggable media
present, Media type is unknown”, the Medium and the
XFP/SFP receive power reading data might not be present in
the output.
Interface index...
Displays the interface index number the SNMP uses to
identify the interface.
identify the interface.
Internet address...
States whether an IP address is assigned to the interface. If
an IP address is assigned, that address is displayed.
an IP address is assigned, that address is displayed.
MTU 1554...
Displays link and IP MTU information.
LineSpeed
Displays the interface’s line speed, duplex mode, and
negotiation mode.
negotiation mode.
ARP type:...
Displays the ARP type and the ARP timeout value for the
interface.
interface.
Last clearing...
Displays the time when the show interfaces counters
where cleared.
where cleared.
Queuing
strategy...
strategy...
States the packet queuing strategy. FIFO means first in first
out.
out.
Input Statistics:
Displays all the input statistics including:
• Number of packets and bytes into the interface
• Number of packets with VLAN tagged headers
• Packet size and the number of those packets inbound to
• Number of packets with VLAN tagged headers
• Packet size and the number of those packets inbound to
the interface
• Number of Multicast and Broadcast packets:
– Multicasts = number of MAC multicast packets
826
Interfaces