Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. 9.8(0.0)
  5. User Manual

DELL 9.8(0.0) User Manual

Download
Page of 1910
ip helper-address hop-count disable
Disable the hop-count increment for the DHCP relay agent.
S4820T
Syntax
ip helper-address hop-count disable
To re-enable the hop-count increment, use the no ip helper-address hop-
count disable command.
Defaults
Enabled; the hops field in the DHCP message header is incremented by default.
Command 
Modes
CONFIGURATION
Command 
History
This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.3.1.0
Introduced for the E-Series.
Usage 
Information
This command disables the incrementing of the hops field when boot requests are 
relayed to a DHCP server through Dell Networking OS. If the incoming boot 
request already has a non-zero hops field, the message is relayed with the same 
value for hops. However, the message is discarded if the hops field exceeds 16, to 
comply with the relay agent behavior specified in RFC 1542.
Related 
Commands
 — specifies the destination broadcast or host address for DHCP 
server requests.
 — displays the current configuration and changes from the 
default values.
916
IPv4 Routing