DELL 9.8(0.0) User Manual
ip icmp source-interface
Enable the ICMP error and unreachable messages to be sent with the source interface IP address, such as
the loopback address, instead of the hops of the preceding devices along the network path to be used for
easy debugging and diagnosis of network disconnections and reachability problems with IPv4 packets.
the loopback address, instead of the hops of the preceding devices along the network path to be used for
easy debugging and diagnosis of network disconnections and reachability problems with IPv4 packets.
Syntax
ip icmp source-interface interface
Parameters
interface
Enter one of the following keywords and slot/port or number
information:
information:
• For a Management Ethernet interface, enter the keyword
managementethernet.
NOTE: When you configure the capability to enable
the loopback IP address to be sent for easy
debugging and diagnosis (IP addresses of the devices
for which the ICMP source interface is configured),
the source IP address of the outgoing ICMP error
message is modified, although the packets are not
sent out using the configured interface. Because the
management interface is configured without any
parameters such as the IP address, it is treated to the
management interface of the primary unit or the
existing unit.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults
Not configured.
Command
Modes
Modes
CONFIGURATION
Command
History
History
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.3(0.0)
Introduced on the S4810, S4820T, S6000, and Z9000
platforms.
platforms.
Usage
Information
Information
You can enable the mechanism to configure the source or the originating interface
from which the packet (the device that generates the ICMP error messages) is
received by the switch to send the loopback address instead of its source IP
from which the packet (the device that generates the ICMP error messages) is
received by the switch to send the loopback address instead of its source IP
918
IPv4 Routing