Raritan Computer 4.7 User Manual
Chapter 8: P2ZCIMs and Z-CIMs
135
If the LED is blinking on and off but at a regulated, moderate speed,
that is, every half second: that P2ZCIM is acting as Manager of the
chain.
that is, every half second: that P2ZCIM is acting as Manager of the
chain.
Paragon II and Z-CIMs (For Paragon Release 4.4 or Earlier)
Z-CIM installation requires that servers are assigned names when added
to the Z-CIM chain. The default name of any Z-CIM is its serial number,
which is not meaningful to you. In order to name the Z-CIM, it must be
connected to a server that is turned on and to the Paragon switch to get
status and name assignment.
to the Z-CIM chain. The default name of any Z-CIM is its serial number,
which is not meaningful to you. In order to name the Z-CIM, it must be
connected to a server that is turned on and to the Paragon switch to get
status and name assignment.
To organize and track Z-CIMs and the servers to which they are
connected, we recommend one of two methods:
connected, we recommend one of two methods:
Record the serial numbers of the Z-CIMs connected to each server,
and then name all Z-CIMs at one time after the chain is complete.
and then name all Z-CIMs at one time after the chain is complete.
First complete the chain and then turn on the Z-CIM one at a time,
checking the serial number on the Z-CIM as it is connected, and
assigning the proper name to the proper server Z-CIM.
checking the serial number on the Z-CIM as it is connected, and
assigning the proper name to the proper server Z-CIM.
When naming or renaming a Z-CIM, switch to that Z-CIM to activate it,
thereby ensuring that its new name is updated in the Paragon switch's
database.
thereby ensuring that its new name is updated in the Paragon switch's
database.
Important: As of release 4.4.1, Paragon II no longer supports
Paragon I Z-CIMs, including the UKVMSPD, which supports local
PC mode. Therefore, to ensure your system continues working with
these first generation Z-CIMs, do NOT upgrade it to 4.4.1 or later. If
a downgrade to 4.4 is needed, you can download prior firmware
releases from
Paragon I Z-CIMs, including the UKVMSPD, which supports local
PC mode. Therefore, to ensure your system continues working with
these first generation Z-CIMs, do NOT upgrade it to 4.4.1 or later. If
a downgrade to 4.4 is needed, you can download prior firmware
releases from
the Raritan website
(
). For
details, see
Downloading Release 4.4 Firmware
(on page 224).