3com 9000 SX User Manual

To return router settings to their defaults and disable routing 
functions, use the commands listed in Table 8-6.

show rip stat {vlan <name> | all}

Displays RIP-specific statistics. Statistics include the 
following per interface:

■

Packets transmitted

■

Packets received

■

Bad packets received

■

Bad routes received

■

Number of RIP peers

■

Peer information

Table 8-5   Router Show Commands (continued)

Table 8-6   Router Reset and Disable Commands 

clear iparp [<ipaddress> | vlan 

<name> | all]

Removes dynamic entries in the IP ARP table. Permanent IP ARP 
entries are not affected.

clear ipfdb [<ipaddress> <netmask> 

| vlan <name> | all]

Removes the dynamic entries in the IP forwarding database.

disable bootp vlan [<name> | all]

Disables the generation and processing of BOOTP packets.

disable bootprelay

Disables the forwarding of BOOTP requests.

disable icmp redirects {vlan 

<name> | all}

Disables the generation of ICMP redirects on one or more VLANs.

disable icmp unreachables

Disables the generation of ICMP unreachable messages on one or 
more VLANs.

disable icmp useredirects

Disables the changing of routing table information when an ICMP 
redirect message is received.

disable ipforwarding {vlan <name> 

| all}

Disables routing for one or more VLANs.

disable 

ipforwarding 

broadcast 

{vlan 

<name> | all}

Disables routing of broadcasts to other networks.

disable irdp {vlan <name> | all}

Disables the generation of router  advertisement messages on 
one or more VLANs.

(continued)

SW9000.BK  Page 13  Wednesday, April 1, 1998  11:00 AM