3com 9000 SX User Manual

4 At the password prompt, enter the password and press [Return].

When you have successfully logged on to the Switch, the 
command-line prompt displays the name of the Switch in its prompt.

5 Assign an IP address and subnetwork mask for the default VLAN by 

using the following command

config vlan <name> ipaddress <ipaddress> {<subnet_mask>}

For example:

Your changes take effect immediately.

6 Configure the default route for the Switch using the following 

command:

config iproute add default <ipaddress> {<metric>}

For example:

7 Save your configuration changes so that they will be in effect after the 

next Switch reboot, by typing:

8 When you are finished using the facility, logout of the Switch by typing

For security purposes, an administrator access level account can 
disconnect a management session that has been established by way of 
a Telnet connection. If this happens, the user logged on by way of the 
Telnet connection is notified that the session has been terminated.

To terminate a Telnet session, follow these steps:

1 Logon to the Switch with an administrator access level.

2 Determine the session number of the session you want to terminate by 

typing

SW9000.BK  Page 7  Wednesday, April 1, 1998  11:00 AM