3com 3CRWX440095A User Manual
80
C
HAPTER
3: C
ONFIGURING
W
IRELESS
S
ERVICES
Expand the AAA icon in the
Organizer panel; right-click Network
Access Rules > Insert > MAC
Network Access
Organizer panel; right-click Network
Access Rules > Insert > MAC
Network Access
1 From MAC Network Access page:
Matching user Glob: enter **
SSID: enter SSID name
2 From Authentication tab:
Select Choose Available > RADIUS or Local
Click Finish; then click Finish again
Expand the WX switch icon in the
Organizer panel, right-click VLANs
> Insert > VLAN
Organizer panel, right-click VLANs
> Insert > VLAN
Note: 3Com recommends
completely isolating the VoWIP VLAN
as a best practice procedure in your
WLAN.
completely isolating the VoWIP VLAN
as a best practice procedure in your
WLAN.
Setup VoWIP VLAN.
1 From VLAN Setup tab:
VLAN ID: select number (must be unique)
VLAN Name: enter name (must be unique)
IP Address: enter IP Address
2 From VLAN Member Selection tab:
VLAN Name: enter VLAN name for the VoWIP phones
Available Members: select port(s) to reach other ports
on the VoWIP VLAN or the VoWIP gateway/PBX; click
Add
on the VoWIP VLAN or the VoWIP gateway/PBX; click
Add
3 From Spanning Tree tab:
Select STP options
4 From Spanning Tree Port Setup tab:
Select STP port options
5 From VLAN IGMP tab:
Uncheck Enabled
Click Finish
Expand the WX switch icon in the
Organizer panel, right-click on ACLs
> Insert
Organizer panel, right-click on ACLs
> Insert
1 From ACL Setup tab:
Click New; select an ACE
Enter ACE set up information
Click Finish
2 From ACL Map tab:
Map ACL to VoWIP VLAN
Click Finish
Table 12 Creating a Service for VoWIP Access (continued)
Task
Path
Primary Parameters to Configure