3com 3CRWX440095A User Manual

The following list summarizes the fields selected or configuration items 
entered in the example that follows to configure VoWIP access:

1 Create a service profile.

„

From the Service Profile wizard, enter “VoWIP” as the Name of the 
service profile and “VoWIP” as the SSID.

„

Select SSID Type Encrypted. Do not select Beacon. Select the Fall 
Through Authentication as None. 

„

Select Encryption. Select WEP or WPA/PSK for the Security Mode, 
and click Finish.

„

WEP—802.1X Auth Enabled is yes, TKIP Enabled is no.

„

WPA/PSK—802.1X Auth Enabled is no, PSK Auth is enabled TKIP 
Enabled is yes. Enter a 64 Hex character key for Preshared key, or 
enter a pass phrase and click Generate Key.

2 Create a radio profile.

„

From the Radio Profile wizard, enter “VoWIP1” as the Name of the 
radio profile.

„

Select Service Profile Selection. Select the VoWIP service profile. Click 
Add. Click Finish. 

3 Configure local authentication (or configure the RADIUS server in 

3WXM).

„

From the Local Database User wizard, click User. 

„

Select New MAC Address User. Click User. Enter user’s VoWIP device 
MAC address. Click Next.

„

From Attributes tab, select User Attributes. Click Finish. 

4 Create a new MAC Network Access rule.

„

For the User Glob value, enter “**”.

„

For the SSID, enter VoWIP.

„

From Authentication tab, select Choose Available > Local. 

„

Click Finish. Click Finish again. 

5 Setup VLANs on the WX switches.

„

From the Create VLANs wizard, click VLAN Setup. Select the VLAN ID 
number (must be unique). Enter the VLAN name and the IP address.