Panasonic WJ-SX150A User Manual

139

A time-lapse VCR (Panasonic Models) is operable with the
system controller, while connecting to the matrix switcher.

Note: Before the use, it is necessary to install the

Multiplexer board in the matrix switcher, connect
the matrix switcher to the time-lapse VCR, and con-
figure the system through WJ-SX150A Administrator
Console, OSD SETUP MENU, and time-lapse VCR's
SETUP MENU. [Refer to p. 32 Installing the
Multiplexer Board, p. 46 Connection with the Time-
lapse VCR (Panasonic Models), p. 63 WJ-SX150A
SETUP MENU (OSD), and p. 79 WJ-SX150A
ADMINISTRATOR CONSOLE.]

The following is the procedure of a Panasonic model time-
lapse VCR.

■ Controlling the Time-lapse VCR

The following are the operating procedures of the time-
lapse VCR via system controllers.

● Multiscreen Segment Switching

The operations are the same as WJ-HD500 Series. 
Refer to p. 131 Multiscreen Display.

Note: 7-, 10-, and 13- segment multiscreen display are

unavailable.

● Normal Playback

The operations are the same as WJ-HD500 Series. 
Refer to p. 131 Normal Playback.

Note: You cannot skip to the previous/next record.

● Fast-forward

1. Press the FF button to fast-forward the tape during the

stop.

2. To stop fast-forwarding, press the STOP button.

Note: Pressing the FF button during fast-forward  will

start playback.

● Rewind

1. During the stop, press the REW button to rewind the

tape.

2. Press the STOP button to stop rewinding.

Note: Pressing the PLAY button during rewind will start

playback.

● Manual Recording

The operations are the same as WJ-HD500 Series. 
Refer to p. 132 Manual Recording.

● Stopping REC ONLY Alarm

The operations are the same as WJ-HD500 Series. Refer to
p. 132.