Panasonic WJ-SX150A User Manual

141

This section will describe what you should take notice when using a PS·Data system controller. 
The same descriptions as the system controller's operating instructions are not mentioned here. Refer to them.

■ Controlling the Recorder with a PS·Data System Controller

● Recorder Mode

Before operating the recorder, it is necessary to enter the recorder mode.

1. Select the desired monitor. (Refer to p. 125 Monitor Selection.)
2. In the PS·Data mode, a number is assigned to each recorder. To select a desired recorder, enter the corresponding num-

ber by pressing the numeric buttons.

Recorder

Number

Master recorder

100

Slave 1 recorder

101

Slave 2 recorder

102

Slave 3 recorder

103

Slave 4 recorder

104

3. Press the CAM button.

The recorder image will be displayed on the selected monitor, and you will enter the recorder mode.

● Operations

1. Press the SHIFT button to activate the FUNCTION buttons.
2. Enter the desired function code, and then press the FUNCTION button. (Refer to the diagram.)

3. To select a camera channel, press the numeric button(s), then CAM button. The system will exit from the recorder mode,

and the selected camera image will be displayed on the monitor.

• Only one operator can enter the recording mode. 
• The images from the recorder, which are displayed on the monitor, is conformed to the recorder setting.
• You cannot skip to the previous/next record by moving the joystick.

Exclusive use to stop recording

Function

Code

Note

Forward field advance

1

Available only during pause

Backward field advance

2

Available only during pause

Pause

4

Playback

5

Recording

6

Equal to the REC button of the recorder

Stop recording and playback

8

Stop playback

9

Exclusive use to stop playback

Stop recording

10

Search forward

11

Search backward

Displaying a recorder's OSD

12

19

Pressing again will hide the display.