3com WX3000 User Manual
2-3
Configuration procedure
Follow these steps to configure to apply a QoS profile dynamically:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
interface-number
—
Configure the
mode to apply a
QoS profile as
port-based
mode to apply a
QoS profile as
port-based
qos-profile port-based
Specify
the mode
to apply a
QoS
profile
the mode
to apply a
QoS
profile
Configure the
mode to apply a
QoS profile as
user-based
mode to apply a
QoS profile as
user-based
undo qos-profile port-based
Optional
By default, the mode to apply
a QoS profile is user-based.
a QoS profile is user-based.
z
If the 802.1x authentication
mode is MAC
address-based, the mode
to apply a QoS profile must
be configured user-based.
mode is MAC
address-based, the mode
to apply a QoS profile must
be configured user-based.
z
If the 802.1x authentication
mode is port-based, the
mode to apply a QoS
profile must be configured
as port-based.
mode is port-based, the
mode to apply a QoS
profile must be configured
as port-based.
Follow these steps to apply a QoS profile manually:
To do…
Use the command…
Remarks
Enter system view
system-view —
In system view
apply qos-profile
profile-name interface
interface-list
profile-name interface
interface-list
Enter
Ethernet port
view
Ethernet port
view
interface interface-type
interface-number
interface-number
Apply a
QoS profile
to specific
ports
QoS profile
to specific
ports
In
Ethernet
port view
Ethernet
port view
Apply a QoS
profile to the
current port
profile to the
current port
apply qos-profile
profile-name
profile-name
Select either of the
operations.
operations.
By default, a port has
no QoS profile applied
to it.
no QoS profile applied
to it.
Displaying and Maintaining QoS Profile
To do…
Use the command…
Remarks
Display QoS profile
configuration
configuration
display qos-profile { all | name
profile-name | interface interface-type
interface-number | user user-name }
profile-name | interface interface-type
interface-number | user user-name }
Available in any view