3com 3CRWX120695A WXR100 User Manual

C

HAPTER

 7: C

ONFIGURING

 W

IRELESS

 P

ARAMETERS

At the end of each power-backoff interval, radios that temporarily 
increased their power reduce it by 1 dBm. The power backoff 
continues in 1 dBm increments after each interval until the power 
returns to expected setting. 

You can specify from 0 to 65535 seconds. The default is 10 seconds. 

The Profile Selection tab lists the service profiles to which the radio profile 
is mapped. The radios managed by the radio profile provide wireless 
service for the service profiles’ SSIDs.

To map the radio profile to a service profile, select the service profile in 
the Available Service Profiles list. Click Add to move the profile name to 
the Current Service Profiles list. 

To remove the mapping between the radio profile and a service profile, 
select the service profile in the Current Service Profiles list. Click Remove 
to move the profile name to the Available Service Profiles list. 

The Radio Selection Tab lists the radios managed by the radio profile. A 
radio can be managed by only one radio profile. 

To add a radio to the radio profile, select the radio in the Available 
Members list. Click Add to move the radio to the Current Members list. 

To remove a radio from the radio profile, select the radio in the Current 
Members list. Click Reset to Default to return the radio to the default 
radio profile. 

If the Available Members list is empty, no MAPs have been configured for 
the switch yet. To configure MAPs, see “Configuring a Directly Connected 
MAP” on page 275 and “Creating a Distributed MAP” on page 273. After 
you configure the MAPs, return to this wizard page to apply the radio 
profile to radios.