3com 3CRWX120695A WXR100 User Manual

C

HAPTER

 11: V

ERIFYING

 C

ONFIGURATION

 C

HANGES

Details about the selected error or warning appear in the lower left 
section of the tab. 

The Resolution section of the tab lists options for resolving the warning or 
error.

Table 27 lists the options on the Event tab’s toolbar.

By default, all warning and error messages are listed. You can use the 
following options to filter the message list:

„

Show Errors—Error messages are listed only when this option is 
selected.

„

Show Warnings—Warning messages are listed only when this option 
is selected.

„

Show Disabled—Disabled rules are listed only when this option is 
selected. (See “Disabling a Rule from the Message List” on page 365.)

For most errors and warnings, 3WXM provides a link to edit the 
configuration information that caused the error or warning. The link 
appears in the Resolutions section of the tab, under the Messages 
column. When you click the edit link, 3WXM opens the configuration 
wizard for the configuration item.

For example, if you create a new WX switch called dang-wxr100 but you 
do not specify the system IP address of the switch, the error message 
System IP address is not assigned or is invalid appears in the Message 
area. To correct the error, click on Edit dang-wxr100 in the Resolutions 
section. The Modify WX switch wizard appears. Use the wizard to edit 
the System IP address. After you save the configuration change, 3WXM 
reevaluates the switch’s configuration. If the system IP address is 
specified, the error no longer appears in the Verification tab.

Table 27   Toolbar Options on Verification Tab

Options

Displays the Verification Options dialog box, which enables you to 
change verification options and disable or reenable rules. (See 
“Changing Verification Options” on page 366.)