3com 3CRWX120695A WXR100 User Manual
Changing Service Settings
497
Changing Service
Settings
Settings
The service settings control the connection parameters, key store
information, and access control to 3WXM Services.
information, and access control to 3WXM Services.
The port numbers used by 3WXM Services must not be used by other
applications on the machine where the 3WXM Services is installed. If port
443 or 162 is used by another application, change the port number for
the monitoring service or for the other application.
applications on the machine where the 3WXM Services is installed. If port
443 or 162 is used by another application, change the port number for
the monitoring service or for the other application.
To change service settings
1 Select Tools > 3WXM Services Setup. The 3WXM Services Setup dialog
box appears.
2 Click the Service Settings tab (if not already selected).
3 To change the TCP port on which the 3WXM Services listens for requests
from 3WXM, type or select the port number in the HTTPS Server Port box.
The default is 443.
The default is 443.
CAUTION: When you click Save, all instances of the 3WXM client lose
connection with the service and will need to reconnect on the new port
number. The HTTPS port number is automatically updated for the 3WXM
client you are using and your connection is automatically restored. Other
clients will need to use the Monitor Service Select wizard to change the
service port and reconnect.
connection with the service and will need to reconnect on the new port
number. The HTTPS port number is automatically updated for the 3WXM
client you are using and your connection is automatically restored. Other
clients will need to use the Monitor Service Select wizard to change the
service port and reconnect.
4 The change the UDP port on which 3WXM Services listens for SNMP
traps, type or select the port number in the HTTPS Server Port box. The
default is 162.
default is 162.
5 To enable 3WXM Services to receive traps, select one or both of the
following trap types:
SNMP V1 Traps
SNMP V3 Traps
You also must add 3WXM Services as a notification target on each WX
switch. 3WXM Services does not start listening for SNMP notifications
from a WX switch until you add 3WXM Services as an SNMP notification
target to the switch. (To configure 3WXM Services as a switch’s
notification target, see “Configuring a Notification Target” on page 191).
switch. 3WXM Services does not start listening for SNMP notifications
from a WX switch until you add 3WXM Services as an SNMP notification
target to the switch. (To configure 3WXM Services as a switch’s
notification target, see “Configuring a Notification Target” on page 191).
6 To enable 3WXM to reuse a switch configuration to replace an old switch
with a new one, select Auto-Config IP Subnet Matching.