3com 4500 PWR 50-PORT User Manual

C

HAPTER

 5: U

SING

 N

ETWORK

 P

ROTOCOL

 C

OMMANDS

The information shown above indicates that vlan-interface 2 is configured with a 
DHCP Server group whose ID is 0.

This section describes the commands you can use to configure and manage the 
Access Management Configuration operations on your Switch 4500.

System View

none

Use the 

 command to enable the access management function. 

Use the 

 command to disable the function.

By default, the Access management function is disabled.

When using the access management function, It is recommended that you cancel 
the static ARP configuration to ensure that the binding of the IP address and 
Ethernet switch takes effect. If you have configured the static ARP for an IP 
address in the current port IP address pool from another port, the system will 
prompt you to cancel the static ARP setting.

To enable the access management function, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]am enable

undo am ip-pool { all | address-list }

Ethernet Port View

 Enter to configure to operate on all the IP addresses (or IP address pools).

 Enter to configure IP address pool for access management.