3com 4500 PWR 50-PORT User Manual

address-list 

Enter IP address list in the 

start_ip_address [ip_address_num 

 

 

 >

 format. 

 Is the start address of an IP address range in the pool. 

 Specifies how many IP addresses following 

 

in the range. 

 means you can specify ten IP address ranges at most.

Use the 

 command to configure the IP address pool for access 

management on a port. The packet whose source IP address is in the specified 
pool is allowed to be forwarded on Layer 3 via the port of the switch. 

Use the 

 command to cancel the access management IP pool of 

the port.

By default, all the IP address pools for access management on the port are null and 
all the packets are permitted through.

Note that if the IP address pool to be configured contains the IP addresses 
configured in the static ARP at other ports, then the system prompts you to delete 
the static ARP to make the later binding effective.

To configure the access management IP address pool on Ethernet1/0/1 and 
permits the addresses from 202.112.66.2 through 202.112.66.20 and the 
specified 202.112.65.1 to access the port, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]interface ethernet 1/0/1

[4500-Ethernet1/0/1]am ip-pool 202.112.66.2 19 202.112.65.1

System View

none

Use the 

 command to enable the access management trap 

function. 

Use the 

 command to disable the access management trap 

function.