3com 4500 PWR 50-PORT User Manual
112
C
HAPTER
5: U
SING
N
ETWORK
P
ROTOCOL
C
OMMANDS
dhcp-server ip
Syntax
dhcp-server groupNo ip ipaddress1 [ ipaddress2 ]
undo dhcp-server groupNo
View
System View
Parameters
groupNo
Enter the DHCP server group number, in the range 0 to 19.
ip_address1
Enter the IP address of the primary Server in the group.
ip_address2
Enter the IP address of the secondary Server in the group. Optional.
Description
Use the
dhcp-server ip
command to configure the IP address of the DHCP
Server used by the DHCP Server group.
Use the
undo dhcp-server ip
command to delete the IP addresses of all DHCP
Servers in DHCP Server group.
This command has fewer parameters when entered in VLAN Interface View. Refer
to
to
dhcp-server
command for details.
Related commands:
dhcp-server
,
debugging dhcp-relay
.
Example
To configure the primary and secondary IP addresses of DHCP Server group 1 as
1.1.1.1 and 2.2.2.2 respectively, enter the following:
1.1.1.1 and 2.2.2.2 respectively, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]dhcp-server 1 ip 1.1.1.1 2.2.2.2
To delete the IP addresses of DHCP Server group1, enter the following:
[4500]undo dhcp-server 1
display dhcp-server
Syntax
display dhcp-server groupNo
View
All views.
Parameter
groupNo
Enter a DHCP Server group number, in the range 0 to 19.
Description
Use the
display dhcp-server
command to view information on a selected DHCP
Server group.