3com 10014917 User Manual
3Com Switch 4200G Family
19
Command Reference
file prompt
Use the
file prompt
command to modify the prompt mode of file operations on the Switch.
System view
flow-control
Use the
flow-control
command to enable port flow control, to avoid packet loss in the event of network
congestion.
Ethernet Port view
Web command: Port -> Administration
format
Use the
format
command to format a storage device.
User view
free user-interface
Use the
free user-interface
command to reset a specified user interface to its default settings. The user
interface will be disconnected after the reset.
User view
free web-users
Use the
free web-users
command to disconnect a specified Web user or all Web users by force.
User view
ftp
Use the
ftp
command to establish a control connection with an FTP server and enter FTP client view.
User view
ftp cluster
Use the
ftp cluster
command to establish a control connection with a cluster FTP server. This command
also leads you to FTP client view.
User view
ftp server
Use the
ftp server
command to configure an FTP server on the management device for the member
devices in the cluster.
Use the
undo ftp server
command to remove the FTP server configured for the member devices in the
cluster.
System view
ftp server enable
Use the
ftp server enable
command to enable FTP server and allow FTP users to log in.
System view
ftp timeout
Use the
ftp timeout
command to configure connection timeout interval.
System view
garp timer
Use the
garp timer
command to set the GARP Hold, Join or Leaver timer value on the current port.
Ethernet Port view
garp timer leaveall
Use the
garp timer leaveall
command to set the GARP LeaveAll timer to a specified value.
System view
get
Use the
get
command to download a remote file and save the file to the local device.
SFTP Client view
get
Use the
get
command to download a remote file and save it as a local file.
FTP Client view
gratuitous-arp learning enable
Use the
gratuitous-arp-learning enable
command to enable the gratuitous ARP packet learning
function.
System view
gvrp
Use the
gvrp
command to enable GVRP globally (in system view) or on a port (in Ethernet port view).
System view
Ethernet Port view