3com 10014917 User Manual
3Com Switch 4200G Family
21
Command Reference
igmp-snooping router-aging-time
Use the
igmp-snooping router-aging-time
command to configure the aging time of the router port.
System view
info-center channel name
Use the
info-center channel name
command to name the channel of the specified number.
System view
info-center console channel
Use the
info-center console channel
command to enable information output to the console through a
specified channel.
System view
info-center enable
Use the
info-center enable
command to enable the information center.
System view
info-center logbuffer
Use the
info-center logbuffer
command to enable information output to the log buffer through the
specified channel (you can also set the size of the log buffer in this command).
System view
info-center loghost
Use the
info-center loghost
command to enable information output to a log host through the specified
channel.
System view
info-center loghost source
Use the
info-center loghost source
command to configure the source interface through which log
information is sent to the log host.
System view
info-center monitor channel
Use the
info-center monitor channel
command to enable information output to terminals through a
specified channel.
System view
info-center snmp channel
Use the
info-center snmp channel
command to enable information output to the SNMP through a
specified channel.
System view
info-center source
Use the
info-center source
command to add a record (that is, an information source) to an information
channel.
System view
info-center synchronous
Use the
info-center synchronous
command to enable synchronous terminal output.
System view
Use the
info-center synchronous
command to enable synchronous terminal output, so that if system
information (such as log information) is output when the user is inputting, the command prompt and input
information are echoed after the output (note that, the command prompt is echoed in command edit state
but is not echoed in interactive state).
information are echoed after the output (note that, the command prompt is echoed in command edit state
but is not echoed in interactive state).
info-center timestamp
Use the
info-center timestamp
command to set the format of time stamp included in the log/trap/debug
information or specify not to include time stamp in the information.
System view
info-center timestamp loghost
Use the
info-center timestamp loghost
command to set the format of time stamp to be sent to log host.
System view
info-center trapbuffer
Use the
info-center trapbuffer
command to enable information output to the trap buffer.
System view
instance
Use the
instance
command to map specified VLANs to a specified spanning tree instance.
MST Region view