3com 10014917 User Manual
3Com Switch 4200G Family
37
Command Reference
ssh2
Use the
ssh2
command to enable the connection between SSH client and server, define key exchange
algorithm preference, encryption algorithm preference and HMAC algorithm preference on the server and
client.
client.
System view
startup bootrom-access enable
Use the
startup bootrom-access enable
command to specify a switch to prompt for the customized
password before entering the BOOT menu.
User view
startup saved-configuration
Use the s
tartup saved-configuration
command to specify the main or backup configuration file for a
switch to start the next time.
User view
Web command: Administration -> Restore Configuration
state
Use the
state
command to configure the state of the current ISP domain/current user.
ISP Domain view
Local User view
RADIUS view
state
Use the
state
command to configure the state of RADIUS server.
RADIUS Scheme view
stop-accounting-buffer enable
Use the
stop-accounting-buffer enable
command to enable the switch to buffer the stop-accounting
requests that bring no response.
RADIUS Scheme view
stopbits
Use the
stopbits
command to set the stop bits of the user interface.
User Interface view
stp
Use the
stp
command to enable or disable MSTP globally or for a port.
System view
Ethernet Port view
Web command: Device -> Spanning Tree
Port -> Spanning Tree Per Port
stp bpdu-protection
Use the
stp bpdu-protection
command to enable the BPDU protection function.
System view
stp bridge-diameter
Use the
stp bridge-diameter
command to set the network diameter of a switched network, which is
represented in terms of the maximum number of switches between any two terminals in a switched network.
System view
stp config-digest-snooping
Use the
stp config-digest-snooping
command to enable the digest snooping feature.
Ethernet Port view
stp cost
Use the
stp cost
command to set the path cost of a port in a spanning tree instance.
Ethernet Port view
stp edged-port
Use the
stp edged-port
command to configure the current Ethernet port as either an edge port or a
non-edge port.
Ethernet Port view
stp interface
Use the
stp interface
command in system view to enable or disable MSTP for specified ports.
System view
stp interface config-digest-snooping
Use the
stp interface config-digest-snooping
command to enable the digest snooping feature.
System view