3com 10014917 User Manual
38
3Com Switch 4200G Family
Command Reference
stp interface cost
Use the
stp interface cost
command to set the path cost of specified ports in a specified spanning tree
instance.
System view
stp interface edged-port
Use the
stp interface edged-port
command to configure the specified Ethernet ports to be either edge
ports or non-edge ports.
System view
stp interface loop protection
Use the
stp interface loop-protection
command to enable the loop prevention function.
System view
stp interface mcheck
Use the
stp interface mcheck
command to perform the mCheck operation for specified ports.
System view
stp interface no-agreement-check
Use the
stp interface no-agreement-check
command to enable the rapid transition feature on a specified
port.
System view
stp interface point-to-point
Use the
stp interface point-to-point
command to specify whether the specified Ethernet ports are
point-to-point links.
System view
stp interface port priority
Use the
stp interface port priority
command to set the port priority of specified ports in a spanning
tree instance.
System view
stp interface root-protection
Use the
stp interface root-protection
command to enable the root protection function for specified
ports.
System view
stp interface transmit-limit
Use the
stp interface transmit-limit
command to set the maximum number of BPDUs that each
specified port can send within a Hello time interval.
System view
stp loop-protection
Use the
stp loop-protection
command to enable the loop prevention function for the current port.
Ethernet Port view
stp max-hops
Use the
stp max-hops
command to set the maximum hop count of the MST region to which the switch
belongs.
System view
stp mcheck
Use the
stp mcheck
command to perform the mCheck operation for the current port.
Ethernet Port view
System view
stp mode
Use the
stp mode
command to set the MSTP operation mode of the switch.
System view
Web command: Device -> Spanning Tree
stp no-agreement-check
Use the
stp no-agreement-check
command to enable the rapid transition feature on the current port.
Ethernet Port view
stp pathcost-standard
Use the
stp pathcost-standard
command to set the standard used for calculating the default path costs
of ports.
System view
stp point-to-point
Use the
stp point-to-point
command to specify whether the port must connect to point-to-point link.
Ethernet Port view