Siemens X-200 User Manual

 

Product Characteristics 

 

4.2 SCALANCE X208 

Device startup, the LED is lit for approx. 6s. 

Ports 1 through 8 LED flash yellow  Setting or display of the fault mask 
Port 1 through 8 LED flashes green The "Show Location" function was activated over Ethernet (e.g. 

PST tool). 
PROFINET IO operation was started with the PN IO controller, 

the attempt to change the fault mask with the button was 

rejected by all the port LEDs flashing once. 
The button was pressed for longer than 15 s to reset the 

configuration. 

LED Display during Startup 

Following startup, the following LEDs light up in the following order: 
•  Power LEDs (green) light up immediately after turning on the power. 

•  Port LEDs (yellow) light up for approx. 6 s, the red LED is off. 

•  Port LEDs go off, the red LED is lit for approx. 20 s. 
After the port LEDs go off, the correct link status is displayed after approx. 2 s. 
The device is now ready for operation. 

4.2.9 

SCALANCE X208 Technical Specifications 

Technical Specifications of the SCALANCE X208 

 

Ports 
Attachment of DTEs or network components over 

twisted pair 

8 x RJ-45 sockets with MDI-X pinning 10/100 

Mbps (half/ full duplex) 

Connector for power supply 

1 x 4-pin plug-in terminal block 

Connector for signaling contact 

1 x 2-pin plug-in terminal block 

Electrical Data 
Power supply 

2 x 24 V DC 

(18 - 32 V DC) 

safety extra-low voltage (SELV) 

Power loss at DC 24 V 

4.4 W 

Current consumption at rated voltage 

185 mA 

Overvoltage protection at input 

PTC resetable fuse (0.6 A / 60 V) 

Permitted Cable Lengths 
Network span parameter/TP cable length 
0 – 100 m 

 

 

 
0 – 85 m 

 
IE FC standard cable with IE FC RJ-45 plug 180 

or  

over IE FC outlet RJ-45 with 0 - 90 m IE FC 

standard cable + 10 m TP cord  
IE FC marine/trailing cable with IE FC RJ-45 plug 

180  

Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line 
Commissioning Manual, 1,   

4-15